EasyHeat™ PN AHB013A

EasyHeat™ PN AHB013AFeatures Fixed Resistance, Pre terminated. For Commercial and Residential Applications Keeps water flowing at ambient temperatures down to 40 F ( 40 C) Cables are rated at 7 Watts per 1 ft (0. 30 m) Built in thermostat turns on at +38 F (+3 C) or below and turns off at +45 F (+7 C) and above Plugs into a standard 120 Vac outlet, must be GFCI protected Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant

Comes with three jerky tips - flat strip

very low VOC formula and is easy to clean with soap and water

High–capacity

6 inch diameter black phenolic wheel with rigid plate mount

Backed by the Irwin Vice-Grip Lifetime Guarantee

Heather Gray 70% cotton/30% polyester • Attached three-piece hood with drawcord closure • Front handwarmer pocket • Stretchable

Kilz 2 fast dry water-based primer sealer/stain killer for use on interior and exterior surfaces

Removes multiple layers of any finish without raising wood grain

Follow the on-pack instructions according to your swimming pool size

• The proven asphalt and vinyl tile cutter for the professional

High-impact solid phenolic wheel for smooth operation under large loads

including 100% recycled boxes